Speedclip for Shimano with Di2



  • compatible with Yamaha e-bikes
  • max speed 50km / h

More details

89,00€ Tax excluded

More info

  • The SpeedClip is clipped onto the original Yamaha speed sensor and can be secured with an O-ring.
  • To activate the Tuningchip the spoke magnet must be slightly offset, for this purpose a finger screw is included for the sake of simplicity.
  • If you have found the correct positioning of the magnet, the tuning chip sets at a speed of about 18 km / h (depending wheel circumference) and halves this, thus 50km / h can be achieved.
  • In order to put the eBike back into the roadworthy original condition, the Speedclip only has to be removed. After repositioning the magnet in the starting position, the original state is restored.
  • The CR2 photo battery used has a mileage of about 4000-5000km.
  • Dimensions of about 4.5 × 4.5cm, weight: 33 grams
  • high quality injection molded housing (no inferior 3D printing)
  • dust and splash proof

Scope of delivery: 1xspeed clip, 1xO-ring, 1x finger screw, 1x battery

Example Video:

licensed No229-2017


The commissioning of the speed clip on the eBike is not permitted on the road. The bike tuned by the speed clip, which makes a manipulation of the speed, may not be operated on the road.

Warranty or warranty claims of the eBike may be limited or voided against the dealer or manufacturer. The use is only allowed on private areas or specially designated test or race tracks. Use of the Speedclip is at your own risk and at your own risk.

7 other products in the same category: